APLIKASI MESIN EXTRUDER KAWAT UNTUK MENINGKATKAN PRODUKTIFITAS PERAJIN PERAK “DHIMAS SILVER” DESA UNGGA, KECAMATAN PRAYA BARAT DAYA, KABUPATEN LOMBOK TENGAH
DOI:
https://doi.org/10.29303/abdiinsani.v12i5.2473Keywords:
Desa Ungga ; Dhimas silver, mesin penarik kawat, extruder, kerajinan perakAbstract
PBM-PKM's partner in this activity is Dhimas Silver with the owner Mr. Sarinda Farid Risky. The partner location is in Ungga Village, Southwest Praya District, Central Lombok. Featured products are: brooches, rings, studs, hairpins, suweng (a type of stud), pendants, bracelets and brooches-pendants. The jewelry is made from a combination of pearl shells which are shaped into oval, round, oval, rectangular, triangular and half round shapes and then framed with silver ornaments combined with pearls to produce classy handicraft products. The problem for SMEs in the production sector is the difficulty in making wire sizes smaller than 0.5 mm, so partners want help in making extruder style wire drawing machines. The aim of this activity is to solve production problems in making wire. The solution for the production sector was to create a wire pulling machine. The results of the activity produced a wire drawing machine with an extruder type. Wire pulling machine specifications Frame/chassis size Length 71.5 cm Width 51.5 cm Height 80 cm, angle iron 2 mm thick 5 x 5 cm. The driving electric motor is ¾ HP, 1400 rpm pulley Ǿ 3 inch connected to a V belt to the middle pulley (input gear box) Ǿ 7 inch with a transmission ratio so that the input gear box rotation is 600 rpm. The rotation of the input gear box in the middle rack will be reduced by the gear ratio 1:50 so that the output rotation of the gear box is 12 rpm, the output rotation of the gear box will be transmitted to the wire pulling roller on the top shelf using a v belt pulley system, with a diameter ratio Ǿ 3 inch to Ǿ 7 inch so that the rotation of the wire pulling roller becomes 5.5 rpm
Downloads
References
Anwar.C, Kompas.com (2015) judul "Desa Ungga Sohor karena Kerajinan Perak", https://travel.kompas.com/read/2015/05/24/15510540/desa.ungga.sohor.karena.kerajinan.perak.
Chatur Adhi W.A.I.G.A.K ,Wijana. M, Joniarta I.W (2015), Studi Tingkat Produktivitas Industri Mikro/Kecil (Export Oriented Product) Dalam Rangka Peningkatan Daya Saing Industri [Studi Kasus : Dipulau Lombok -Ntb] Laporan Hibah Bersaing tahun I (2015) dan tahun II (2016)
Chatur Adhi W.A.I.G.A.K ,Wijana. M, Joniarta I.W , (2016) Studi Tingkat Produktivitas Industri Mikro/Kecil (Export Oriented Product) Dalam Rangka Peningkatan Daya Saing Industri [Studi Kasus : Dipulau Lombok -Ntb] Laporan Hibah Bersaing tahun II (2016)
Chatur Adhi W.A.I.G.A.K ,Wijana. M, Joniarta I.W (2017) Pengaruh Treatment Terhadap Peningkatan Produktivitas Industry Mikro / Kecil Sasaran (Eksport Oriented Product) Dalam Rangka Peningkatan Daya Saing Industri (Studi Kasus: di Pulau Lombok) Jurnal Dinamika teknik Mesin Vol 7 (1) (50-53) https://doi.org/10.29303/dtm.vv7il.7
.
Chatur Adhi W.A.I.G.A.K ,Wijana. M, Joniarta I.W (2016) Development Elements of Industrial Production Increase in Productivity Of Micro / Small (Export Oriented Product) for Enhancing Competitiveness of Industry [Case Study: In Lombok-NTB] Proseeding ICST Proceedings The 1st International Conference on Science and Technology (ICST) 2016 ISBN : 978-602-6640-00-0 173- 176 .
Joniarta I.W , Wijana, M. , Chatur Adhi I.G.A.K W.A ( 2018) Pemberdayaan Industri Kreatif Kerajinan Kulit Kerang Dan Mutiara Yang Ramah Lingkungan Dan Berkelanjutan Untuk Menunjang Pariwisata Di Lombok – Ntb Prosiding PKM-CSR , Vol.1(2018)e-ISSN:2655-3570 https://prosiding- pkmcsr.org/index.php
Joniarta,I.W , Sayoga, I.M.A, Wijana. M, Chatur Adhi W.A I.G.A.K , Surasni, N.K (2020) Pemberdayaan Industri Kreatif Kerajinan Perak Melalui Peningkatan Teknologi Tepat Guna Mesin Giling Perak Jurnal Abdi Insani Universitas Mataram Volume 7, Nomor 3, (256-261) Desember 2020 Available online : http://abdiinsani.unram.ac.id Doi article : http://doi.org/10.29303/abdiinsani.v7i3.346 P-ISSN 2356-2935, E-ISSN 2657-0629
Sayoga I M.A , Mirmanto, . I G. Bawa Susana, I G B . Mara I.M, .I. W. Joniarta I W (2019 ) Disain Meja Ergonomis Mesin Poles untuk Perajin Perak di Desa Ungga,Kecamatan Praya Barat Daya, Kabupaten Lombok Tengah. Jurnal Karya Pengabdian Teknik Mesin Vol.1 .. No.2 April 2019. e- ISSN 2655-8068 (online) jkp.unram.ac.id/index.php/JKP halaman 84 – 90
Sayoga I.M.A, Wijana. M,. Putra.I.N.N.A, Joniarta.I.W, Ilham Maulana Akbar.I.M, Rizky Fathullah.R (2023) Penerapan Desain Ergonomis Mesin Poles Untuk Kerajinan Perak “Ungga Creative” Untuk Menunjang Pariwisata Di Desa Ungga, Kecamatan Praya Barat Daya, Kabupaten Lombok Tengah , Jurnal Abdi Insani Volume 10 (4) , (2921-2942)
Suartika I.M, Wijana M, Putra, I.N.N.A, Ramadhan G.B, Putra.A.W (2024) Aplikasi Mesin Extruder Kawat Untuk Meningkatkan Produktifitas Perajin Perak “Dhimas Silver” Desa Ungga, Kecamatan Praya Barat Daya, Kabupaten Lombok Tengah laporan Akhir Pengabdian Kepada Masyarakat PKM Kemdikbudristekdikti
Pulat, B.M. 1997. Fundamental of Industrial Ergonomics. Second Edition. USA: Waveland Press, Inc.
Tarwaka. 2011. Ergonomi Industri: Dasar-dasar Pengetahuan Ergonomi dan Aplikasi
di Tempat Kerja. Surakarta: Harapan Press