PENERAPAN DESAIN ERGONOMIS MESIN POLES UNTUK KERAJINAN PERAK “UNGGA CREATIVE) UNTUK MENUNJANG PARIWISATA DI DESA UNGGA, KECAMATAN PRAYA BARAT DAYA, KABUPATEN LOMBOK TENGAH
DOI:
https://doi.org/10.29303/abdiinsani.v10i4.1204Keywords:
Ungga village, polishing machine, ergonomics, silver workAbstract
Ungga Village, Praya Barat Daya District, is a well-known silver craft center in Central Lombok. Featured products are: brooches, rings, studs, hairpins, suweng, pendants, bracelets and brooches-pendants. The jewelry is made from a combination of pearl shells which are shaped into oval, round, oblong, rectangular, triangular and half round shapes and then tied/framed with silver ornaments. PKM partner "Ungga Creative" with owner Mr Farid. The problem encountered in SMEs in the production sector is that the working position of the product polishing section is done by sitting cross-legged on the floor, so it is not comfortable for working conditions for more than 1 hour. The field of management is financial management that has not been organized so that business conditions cannot be analyzed as profit or loss. The PKM program provides a solution to SMEs for the inconvenience of working when polishing silver crafts, by designing and designing a polishing table that can be used comfortably and safely. Solutions for the field of financial management are carried out by providing training and assistance in financial management for SME owners. The steps that have been taken are designing a polishing machine based on ergonomic concepts using anthropometric data from employees. So you get the size of the silver craft polishing machine table which is designed with (dimensions: table height 60 cm, table top cover height 40 cm table length 75 cm table width 50 cm. Includes Flash-250C polishing grinder machine power 220/50 Hz 0, 25 HP 2870 rpm. The polishing machine has been handed over to PKM partners and has been able to increase partner productivity by up to 30% because the polishing process can be 2x faster than the previous work method.
Downloads
References
Adhi, W. A., Wijana, I. M., & Joniarta, I. W. (2016). Development Elements of Industrial Production Increase in Productivity Of Micro/Small (Export Oriented Product) for Enhancing Competitiveness of Industry [Case Study: In Lombok-NTB] Proseeding International Conference on Sciences and Technology. 173-176. ISBN : 978-602-6640-00-0
Adhi, W. A., Wijana, I. M., & Joniarta, I. W. (2017). Pengaruh Treatment Terhadap Peningkatan Produktivitas Industri Mikro/Kecil Sasaran (Export Oriented Product) Dalam Rangka Peningkatan Daya Saing Industri [Studi Kasus : Di Pulau Lombok-Ntb] 2017. Jurnal Dinamika Teknik Mesin, 7(1) 50-53. https://doi.org/10.29303/dtm.v7i1.7 p. ISSN: 2088-088X, e. ISSN: 2502-1729.
Ana, I. (2017). Pengaruh Penggunaan Teknologi Tepat Guna dalam Meningkatkan Produktivitas UKM Batik Tulis di Kampung Batik Kauman Kota Pekalongan. Jurnal ANUVA, 1(1): 11-18, 2017 Copyright ©2017, ISSN: 2598-3040 online Universitas Diponegoro Available Online at: http://ejournal.undip.ac.id/index.php/anuva.
Joniarta, I. W., Sayoga, I. M. A, Wijana, I. M., Adhi, W. A., & Surasni, N. K. (2020). Pemberdayaan Industri Kreatif Kerajinan Perak Melalui Peningkatan Teknologi Tepat Guna Mesin Giling Perak. Jurnal Abdi Insani Universitas Mataram, 7(3), 256-261, 3, Desember 2020 P-ISSN 2356-2935Doi article: http://doi.org/10.29303/abdiinsani.v7i3.346E-ISSN 2657-0629
Kumbadewi, L. S., Suwendra, I. W., & Susila, I W. (2021). Pengaruh Umur, Pengalaman Kerja, Upah, Teknologi Dan Lingkungan Kerja Terhadap Produktivitas Karyawan. e-Journal Universitas Pendidikan Ganesha Jurusan Manajemen, 9(1), 1-9. Jurusan Manajemen Universitas Pendidikan Ganesha (P-ISSN: 2476-8782).
Narendra, P. S. A., & Ardani, I. G. A. K. S. (2020). Strategi Pengembangan Usaha Kerajinan Perak Dengan Metode Analisis Swot Pada Usaha Sss Silver. E-Jurnal Manajemen, 9(10), 2020: 3506-3526 ISSN : 2302-8912DOI: https://doi.org/10.24843/EJMUNUD.2020.v09.i10.p05
Pratama, A. Y. (2022). Peningkatan Kinerja Karyawan Pada Industri Kreatif Kerajinan Perak Kotagede Yogyakarta Dengan Menggunakan Human Reliability Assessment. 10(2), 147-160, Agustus 2022 Inaque Journal of Industrial & Quality Engineering https://ojs.unikom.ac.id/index.php/inaque OI: https://doi.org/10.34010/iqe.v10i2.7192 p-ISSN : 2303-2715 e-ISSN : 2622-5816.
Pulat, B. M. (1997). Fundamental of Industrial Ergonomics. Second Edition. USA: Waveland Press, Inc
Qorib, H. K. H., Joniarta, I. W., Hainingsih, W. M., Puspita, S. L., Jundi, A., Setyawan, D., Huriah, A. R., Umrah, S., Suryaningsih, D., & Ladira, F. (2023) Peranan Digital Marketing Bagi Usaha Mikro Dalam Menggembangkan Desa Ungga Sebagai Desa Wisata Kampung Perak. Jurnal Bakti Nusa. IV(2), 64-72. (Oktober 2023)p-ISSN: 2721-2181, e-ISSN: 2747-1357 DOI https://doi.org/10.0000/jgn.v4i2.96. www.baktinusa.unram.ac.id.
Sayoga, I. M. A., Mirmanto., Susana, I. G. B. I., Mara, M., Joniarta, I. W. (2019). Disain Meja Ergonomis Mesin Poles untuk Perajin Perak di Desa Ungga, Kecamatan Praya Barat Daya, Kabupaten Lombok Tengah. Jurnal Karya Pengabdian Teknik Mesin, 1(2) 84-90. 2 April 2019. e- ISSN 2655-8068 (online) jkp.unram.ac.id/index.php/JKP.
Stevenson, M. G. (2003). Notes on the Principles of Ergonomics. Publisher: Mike Stevenson Ergonomics
Swabawa, A. A. P., Meirejeki, I. N., Pemayun, I. D. G. A. (2020). Strategi Pengembangan Dalam Mengatasi Kelesuan Penjualan Kerajinan Perak Di Kabuaten Gianyar (2020) Warmadewa Management and Business Journal (WMBJ), 2(1), 26-40. https://ejournal.warmadewa.ac.id/index.php/wmbj ISSN Print: 2654-816X and ISSN Online: 2654-8151.
Tarwaka. (2011). Ergonomi Industri: Dasar-dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja. Surakarta (ID): Harapan Press.
Umam, F., Putra, F. A. (2018). IbM Kelompok Pengerajin Perak Bangil Kabupaten Pasuruan, Jurnal Ilmiah Pengabdhi Universitas Trunojoyo Madura, 3(2), 12-20, Oktober 2018 http://journal.trunojoyo.ac.id/pangabdhi ISSN: 2477-62891.
