EDUKASI & PENERAPAN ALAT HANDWASHER TOUCHLESS PADA SMK GLOBAL PRIMA KABUPATEN BEKASI, JAWA BARAT
DOI:
https://doi.org/10.29303/abdiinsani.v10i1.833Keywords:
Community Service, Handwasher Touchless, Education and Implementation, Design and ConstructionAbstract
In this COVID-19 pandemic season, there are still many people who tend to lack awareness in complying with health protocols, especially in terms of crowding and maintaining hand hygiene. Many innovations for hand washing facilities have been made in tourist places, restaurant toilets, malls, and even places of worship. However, during the current Covid-19 pandemic season, have these placements and tools been able to break the ropes of spreading the virus? The answer is that it is still not enough, because the hand washing place is still touched by many hands. Even though some have used automatic or touchless hand washing stations, the purchase of these tools is quite expensive among the surrounding community. Therefore, in this project we intend to break the rope of the spread of the coronavirus, by designing an economical touchless hand washing sink. Then, after the tool was completed, the grant process to the party in need, namely SMK Global Prima in Tambun Utara, Bekasi Regency, was carried out. Although on a small scale, we hope that this effort can be useful for the students involved, the partners of SMK Global Prima, and the community in general.
Downloads
References
Agustino, L. (2020). Analisis Kebijakan Penanganan Wabah Covid-19: Pengalaman Indonesia Analysis Of Covid-19 Outbreak Handling Policy: The Experience Of Indonesia. Junal Borneo Administrator, 16(2), 253–270.
Ali, S., Ali, S., Susanto, H., Hartati, R., & Raditya, Z. (2020). Perancangan Touchless Hand Washer Sistem Pijakan Kaki untuk Pencegahan Penyebaran COVID-19. Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi, 6(2), 179-186.
Asrul, A., Sahidin, S., & Alam, S. (2021). Mesin Cuci Tangan Otomatis Menggunakan Sensor Proximity Dan Dfplayer Mini Berbasis Arduino Uno. Jurnal Mosfet, 1(1), 1-7.
Dym, C. L. (2013). Engineering design: A project-based introduction. John Wiley & Sons.
Gamayel, A., & Octavianus, G. (2021). Tutorial Ansys Workbench untuk Bidang Mekanikal: Jilid 1. Media Sains Indonesia.
Harahap, M. H., Fibriasari, H., Ihsan, M., Irfand, I., Panggabean, D. D., & Syah, D. H. (2020). Upaya Peningkatan Pola Hidup Bersih Sehat Di Desa Ibus Melalui Diseminasi Teknologi Tepat Guna Filter Air, Cuci Tangan Digital Dan Mesin Pembuat Sabun Untuk Menghadapi Pandemi Covid-19. Jurnal Pengabdian Kepada Masyarakat, 26(4), 236-240.
Hinonaung, J. S. H., Pramardika, D. D., & Mahihody, A. J. (2022). Gambaran Perilaku Masyarakat Sangihe dalam Menerapkan Protokol Kesehatan 6M di Masa Pandemi Covid-19. Jurnal Ilmiah Sesebanua, 6(2), 53-57.
Ilyas, F. (2021). Analisis Swot Kebijakan Pembatasan Sosial Berskala Besar (PSBB) dan Pemberlakuan Pembatasan Kebijakan Masyarakat (PPKM) Terhadap Dampak Ekonomi di Tengah Upaya Menekan Laju Pandemi Covid-19. Jurnal Akrab Juara, 6(3), 190-198.
Kurnia, F., & Pradityatama, M. (2022). Pembuatan Buku Panduan Mata Kuliah Capstone Design di Jurusan Teknik Mesin Universitas Mataram. Jurnal Abdi Insani, 9(4), 1407-1415.
Kusnan, A., Sulastrianah, S., & Rhenislawaty, R. (2020). Peningkatan Peran Civitas Perguruan Tinggi Dalam Upaya Tanggap Bencana Nasional Melalui Edukasi Dan Pencegahan Penyebaran Wabah Pada Masa Pandemi Covid 19 Di Kabupaten Kolaka. Journal of Community Engagement in Health, 3(2), 257-265.
Lall, S., & Singh, N. (2020). COVID-19: Unmasking the new face of education. Int. J. Res. Pharm. Sci., 48-53.
Puspitorini, F. (2020). Strategi Pembelajaran di Perguruan Tinggi Pada Masa Pandemi Covid-19. Jurnal Kajian Ilmiah, 1(1), 99-106.
Sinaga, L. R. V., Munthe, S. A., & Bangun, H. A. (2020). Sosialisasi perilaku cuci tangan pakai sabun di desa sawo sebagai-bentuk kepedulian terhadap masyarakat ditengah mewabahnya virus covid-19. Jurnal Abdimas Mutiara, 1(2), 19-28.
Smith, J., & John Clarkson, P. (2005). A method for assessing the robustness of mechanical designs. Journal of Engineering Design, 16(5), 493-509.
Sumantyo, F. D. S. (2020). Pendidikan Tinggi di masa dan pasca Covid-19. Jurnal Kajian Ilmiah, 1(1), 81-92.
Syam, W. P. (2017). Metrologi Manufaktur. Nottingham, UK.
Ullman, D. G., Wood, S., & Craig, D. (1990). The importance of drawing in the mechanical design process. Computers & Graphics, 14(2), 263–274.
