PENINGKATAN KOMPETENSI TEKNIK OPTIMASI LANJUT MELALUI WEBINAR INTERNASIONAL
DOI:
https://doi.org/10.29303/abdiinsani.v11i2.1583Keywords:
Advanced optimization techniques, machine scheduling, webinarAbstract
Optimization techniques are one of the important materials that need to be understood well by Industrial Engineering students at all levels. One form of development of optimization techniques is manifested in scheduling machines on the production floor in the real industrial world, which of course requires more advanced methods than those generally studied in class. Student literacy regarding advanced optimization techniques needs to continue to be sharpened, especially at the master's level. This community service (PkM) activity aims to share knowledge with master students majoring in Industrial Engineering at Mapua University, Philippines regarding advanced optimization engineering material by highlighting real case studies. The method applied in this activity is in the form of a lecture via web seminar (webinar) via Zoom, followed by discussion and questions and answers. At the end of the session, participants were asked to provide feedback regarding the continuity of the seminar, which would then be analyzed and used as material for future improvements. The dissemination of material related to intelligent production scheduling in an all-digital industrial environment took place smoothly, demonstrated through active participation and interactive questions and answers. In the satisfaction survey, some information was obtained regarding the suitability of the theme to the participants' needs regarding the lectures taken, the accuracy of seminar time management, the mastery of the presenter in the discussion presented, and the suitability of the material to the participants' needs. From the analysis carried out, it was discovered that the theme raised was following the needs of the participants, and the timing of the seminar was also appropriate. Apart from that, it is also known that there has been an increase in webinar participants' knowledge regarding the topics raised. Professional development seminars have shown a positive impact on the development of participant's abilities and knowledge, especially those related to exposure to scheduling and production optimization.
Downloads
References
Duran, E., Görgülü, G., Kuruç, A. P., Gülhan, İ., Doğruyol, M. C., Öztop, H., & Öner, A. (2020). The Uniform Parallel Machine Scheduling Problem: A Case Study. Proceedings of the International Symposium for Production Research 2019 (hal. 839-850). Springer International Publishing.
Liu, Y., Luo, X., Cheng, S., Yu, Y., & Tang, J. (2021). Dynamic Bus Scheduling of Multiple Routes Based on Joint Optimization of Departure Time and Speed. Discrete Dynamics in Nature and Society, 1-20.
Hochdörffer, J., Hedler, M., & Lanza, G. (2018). Staff Scheduling in Job Rotation Environments Considering Ergonomic Aspects and Preservation of Qualifications. Journal of Manufacturing Systems, 103-114.
Lin, S.-W., & Ying, K.-C. (2022). Single Machine Scheduling Problems with Sequence-dependent Setup Times and Precedence Delays. Scientific Reports, 9430.
Yıldız, B., Kandiller, L., & Toy, A. Ö. (2022). Uniform Parallel Machine Scheduling with Sequence Dependent Setup Times: A Randomized Heuristic. Digitizing Production Systems: Selected Papers from ISPR2021 (hal. 812-825). Springer International Publishing.
Puspawardhani, G., & Yusriski, R. (2017). Penggunaan Aturan Prioritas Dalam Penjadwalan Perakitan dan Pemesinan Untuk Mengurangi Makespan. Prosiding Seminar Nasional Ilmu Pengetahuan dan Teknologi Jenderal Achmad Yani (SNIJA).
Zhou, L., Zhang, L., & Horn, B. K. (2020). Deep Reinforcement Learning-based Dynamic Scheduling in Smart Manufacturing. Procedia CIRP, 383-388.
Turistiati, A. T., Amrullah, R. D., & Shafitri. (2023). The Improvement of Students’ Awarness and Motivation to Learn English Trough International Webinar: The Importance of English Competency in Building Intercultural Communication. Jurnal Komunitas: Jurnal Pengabdian kepada Masyarakat, 72-79.
Barus, U., & Prawiyata, Y. D. (2022). Sosialisasi Pemecahan Masalah Korupsi Sebagai Pencegahan Tindak Pidana Korupsi Melalui Metode Pembelajaran Berbasis Masalah di SD Swasta PAB 34 Patumbak. AMALIAH: Jurnal Pengabdian Kepada Masyarakat, 292-296.
Corman, F., D’Ariano, A., Marra, A. D., Pacciarelli, D., & Samà, M. (2017). Integrating Train Scheduling and Delay Management in Real-time Railway Traffic Control. Transportation Research Part E: Logistics and Transportation Review, 213-239.
Waskita, H., Purnomo, H. D., & Hendry. (2016). Penjadwalan Kelas Praktikum Menggunakan Algoritma Steepest Ascent Hill Climbing. AITI, 153-168.
Bishop, P. A., & Herron, R. L. (2015). Use and Misuse of the Likert Item Responses and Other Ordinal Measures. International Journal of Exercise Science, 297.
Chai, T., Qin, S. J., & Wang, H. (2014). Optimal Operational Control for Complex Industrial Processes. Annual Reviews in Control, 81-92.
Ghaleb, M., Zolfagharinia, H., & Taghipour, S. (2020). Real-time Production Scheduling in the Industry-4.0 Context: Addressing Uncertainties in Job Arrivals and Machine Breakdowns. Computers & Operations Research.
Taherdoost, H. (2019). What Is the Best Response Scale for Survey and Questionnaire Design; Review of Different Lengths of Rating Scale / Attitude Scale / Likert Scale. International Journal of Academic Research in Management (IJARM), 1-10.
South, L., Saffo, D., Vitek, O., Dunne, C., & Borkin, M. A. (2022). Effective Use of Likert Scales in Visualization Evaluations: A Systematic Review. Computer Graphics Forum, 43-55.
Tanujaya, B., Prahmana, R. C., & Mumu, J. (2023). Likert Scale in Social Sciences Research: Problems and Difficulties. FWU Journal of Social Sciences, 89-101.
Karlsohn, T. (2016). The Academic Seminar as Emotional Community. Nordic Journal of Studies in Educational Policy.
