SOSIALISASI PEMANFAATAN BETON SERAT HYBRID UNTUK PENINGKATAN DURABILITAS KONSTRUKSI BANGUNAN GEDUNG DI CV. SOKOGI REKSACIPTA
DOI:
https://doi.org/10.29303/abdiinsani.v12i9.2934Keywords:
building, concrete, durability, hybrid, fiberAbstract
Building construction in the Soloraya area often encounters cracking problems. This problem is generally caused by various factors such as improper design, poor material quality, building age, etc. which can have an impact on durability and structural strength. Therefore, Appropriate Structure Research Group conducted a community service with the aim of providing solutions to be utilized in the construction of buildings in the Soloraya area. This service was carried out with CV. Sokogi Reksacipta which is a local construction consultancy service provider. The concrete innovation presented as a solution is hybrid fiber concrete that combines natural fibers, i.e. ramie fibers and synthetic microfibers with improved mechanical properties to increase resistance to cracking. Through a series of laboratory tests and data analysis, the effectiveness of using hybrid fiber concrete in reducing the risk of cracking and increasing the durability of concrete structures was evaluated. The method used in this community service is socialization of the use and method of making innovative concrete. From the results of this program, 93.75% of participants understood the socialization activities, therefore this program is expected to contribute to the development of more durable and sustainable concrete technology for building construction applications in the Soloraya area.
Downloads
References
Ahmad, J., & Zhou, Z. (2022). Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review. Construction and Building Materials, 333(December 2021), 127353. https://doi.org/10.1016/j.conbuildmat.2022.127353
Badan Standardisasi Nasional. (2012). SNI 7656:2012 Tata cara pemilihan campuran untuk beton normal, beton berat dan beton massa.
Bentur, A., & Sidney, M. (2006). Fibre reinforced cementitious composites. Crc Press.
Buratti, N., Mazzotti, C., & Savoia, M. (2011). Post-cracking behaviour of steel and macrosynthetic fibre-reinforced concretes. Constr Build Mater, 25(5), 2713–22. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2010.12.022
Chidambaram, S., & Agarwal, P. (2018). Performance evaluation of metallic and synthetic fiber hybridization on the cyclic behavior of exterior beam-column joint. Advances in Civil Engineering Materials, 7(1), 133–152. https://doi.org/10.1520/ACEM20170137
Cesa, F. S., Turra, A., & Baruque-Ramos, J. (2017). Synthetic fibers as microplastics in the marine environment: A review from textile perspective with a focus on domestic washings. Science of the Total Environment, 598, 1116–1129. https://doi.org/10.1016/j.scitotenv.2017.03.133
Deni, D. P., Kristiawan, S. A., & Sangadji, S. (2022). Interfacial bond strength between micro synthetic fibre-reinforced patch repair mortar and concrete substrate. Engineering and Applied Science Research, 49(5), 630–642. https://doi.org/10.14456/easr.2022.62
Hilmy, M., & Prabowo, H. (2020). Service Life Design for Infrastructure under Indonesian Environmental Exposure. June, 133–138. https://doi.org/10.5220/0008904001330138
Khanlou, A., MacRae, G., Scott, A., Hicks, S., & Clifton, G. (2012). Shear performance of steel fibrereinforced concrete. Australasian Structural Engineering Conference, 1(2006), 8. https://doi.org/https://doi.org/ 10.1111/joa.12446
Naaman, A. E. (2007). Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites. Journal Advanced Concrete Technology, 1(3), 241–52. https://doi.org/https://doi.org/ 10.3151/jact.1.241
Prabowo, H. (2017). Persyaratan Durabilitas Beton Struktural Sebagai Langkah. Seminar Nasional Penerapan Ilmu Pengetahuan Dan Teknologi (Pipt).
Pratiwi, W. D., Putra, F. D. D., Triwulan, Tajunnisa, Y., Husin, N. A., & Wulandari, K. D. (2021). A Review of Concrete Durability in Marine Environment. IOP Conference Series: Materials Science and Engineering, 1175(1), 012018.
Purboputro, P. M., & Hariyanto, A. (2017). Analisis Sifat Tarik dan Impak Komposit Serat Rami Dengan Perlakuan Alkali Dalam Waktu 2,4,6, dan 8 Jam Bermatrik Poliester. Jurnal Ilmiah Teknik Mesin, 64–67.
Rafdinal, R. S., Hamada, H., & Sagawa, Y. (2015). Deterioration Evaluation and Life-Extension Strategy of 77 Year-Old Concrete Structure Exposed to Indonesian Marine Environment. August 2018.
Roesler, J. R., Altoubat, S. A., Lange, D. A., Rieder, K. A., & Ulreich, G. R. (2006). Effect of synthetic fibers on structural behavior of concrete slabs-on-ground. ACI Material Journal, 103(1), 3–10.
S. Zainal, S. M. I., Hejazi, F., & Mafaileh, A. M. A. (2023). Strengthening of Reinforced Concrete slabs using macro and micro synthetic fibers. Structures, 51(September 2022), 1579–1590. https://doi.org/10.1016/j.istruc.2023.03.120
Sanjay, M. R., Arpitha, G. R., Senthamaraikannan, P., Kathiresan, M., Saibalaji, M. A., & Yogesha, B. (2019). The hybrid effect of Jute/Kenaf/E-glass woven fabric epoxy composites for medium load applications: impact, inter-laminar strength, and failure surface characterization. Journal of Natural Fibers.
Santosa, B., Turangan, A. G., & Kristiawan, S. A. (2024). Direct tensile strength of repair mortar containing micro-synthetic fiber. AIP Conference Proceedings, 3110(1).
Septiani, V., Suryan, V., & Amalia, D. (2024). Faktor-Faktor yang mempengaruhi Campuran Beton: Rancangan beton, Kekuatan beton, dan Karakteristik beton. Journal of Engineering and Transportation (JET), 2(1).
Thomas, J., & Ramaswamy, A. (2007). Mechanical Properties of Steel Fiber-Reinforced Concrete. Journal Material Civil Engineering, 19, 385–92. https://doi.org/https://doi.org/ 10.1061/͑ASCE͒0899-1561͑2007͒19:5͑385͒.
Zheng, Z., & Feldman, D. (1995). Synthetic fibre-reinforced concrete. Progress in Polymer Science, 20(2), 185–210. https://doi.org/10.1016/0079-6700(94)00030-6
