PENYULUHAN PENERAPAN KESELAMATAN DAN KESEHATAN KERJA (K3) DI CV MORIO HATRI INDONESIA
DOI:
https://doi.org/10.29303/abdiinsani.v12i2.2280Keywords:
Keselamatan, Kesehatan, kerja, industri, CV Morio Hatri IndonesiaAbstract
Keselamatan dan Kesehatan Kerja (K3) merupakan aspek penting yang kurang mendapat perhatian di CV Morio Hatri Indonesia, sebuah perusahaan manufaktur yang bergerak dalam perakitan suku cadang (sparepart) otomotif. Rendahnya pemahaman pekerja terhadap K3, minimnya ketaatan dalam penggunaan Alat Pelindung Diri (APD), serta kurangnya infrastruktur K3 merupakan permasalahan utama yang ditemukan. Tujuan penyuluhan ini adalah untuk meningkatkan pengetahuan pekerja mengenai pentingnya K3, penggunaan APD, identifikasi bahaya dan prosedur evakuasi. Metode meliputi analisis awal (survei dan wawancara), desain materi (presentasi, video, simulasi), perancangan arsitektur infrastruktur yang diperlukan, implementasi melalui penyuluhan serta praktik langsung, dan monitoring evaluasi dengan pendampingan serta kuisioner terkait peningkatan keberdayaan, keterampilan, serta kepuasan mitra. Hasil menunjukkan adanya masalah K3 berupa minimnya pengetahuan dan penerapan K3. Tim PkM menyusun materi penyuluhan dalam bentuk presentasi, video, dan simulasi terkait pentingnya K3, penggunaan APD, identifikasi bahaya, serta prosedur evakuasi. Selain itu, tim juga merancang infrastruktur K3 seperti jalur evakuasi, tanda keselamatan, dan peralatan darurat. Penyuluhan melalui presentasi dan simulasi penggunaan APD berhasil dilaksanakan dengan partisipasi pekerja serta manajemen industri. Hasil monitoring dan evaluasi menunjukkan peningkatan pengetahuan pekerja, penggunaan APD yang lebih konsisten, pemahaman potensi bahaya, dan prosedur evakuasi, meskipun masih dibutuhkan pendampingan lanjutan untuk memastikan konsistensi penerapan K3. Penyuluhan ini berhasil meningkatkan pengetahuan pekerja dan penerapan K3 di Industri CV Morio Hatri Indonesia. Meningkatkan pengetahuan dan keterampilan penggunaan APD, kemampuan mengidentifikasi bahaya dan pengetahuan prosedur evakuasi. Untuk menjaga keberlanjutan program, disarankan adanya pelatihan berkelanjutan dan pengawasan ketat terhadap penerapan K3 di perusahaan.
Downloads
References
Alzerreca, M., Paris, M., Boyron, O., Orditz, D., Louarn, G., & Correc, O. (2015). Mechanical properties and molecular structures of virgin and recycled HDPE polymers used in gravity sewer systems. Polymer Testing, 46, 1–8. https://doi.org/10.1016/j.polymertesting.2015.06.012
Arana-Landín, G., Laskurain-Iturbe, I., Iturrate, M., & Landeta-Manzano, B. (2023). Assessing the influence of industry 4.0 technologies on occupational health and safety. Heliyon, 9(3), e13720. https://doi.org/10.1016/j.heliyon.2023.e13720
Babalola, A., Manu, P., Cheung, C., Yunusa-Kaltungo, A., & Bartolo, P. (2023). Applications of immersive technologies for occupational safety and health training and education: A systematic review. Safety Science, 166(May), 106214. https://doi.org/10.1016/j.ssci.2023.106214
Benson, C., Obasi, I. C., Akinwande, D. V., & Ile, C. (2024). The impact of interventions on health, safety and environment in the process industry. Heliyon, 10(1), e23604. https://doi.org/10.1016/j.heliyon.2023.e23604
Colby, L. A., & Corwin, E. (2017). Occupational Health and Safety. In Patient Derived Tumor Xenograft Models: Promise, Potential and Practice. Elsevier Inc. https://doi.org/10.1016/B978-0-12-804010-2.00014-X
Das, S., Nath, T. C., Rahman, M., Uddin, J., Naher, N., Akter, M., Rahman, M., & Adhikari, A. (2024). Occupational hazards in lead-acid battery factories in Bangladesh: Assessing excess heat, noise, chemical exposures, and health impacts on workers. Safety and Health at Work, xxxx, 0–7. https://doi.org/10.1016/j.shaw.2024.06.004
Guzman, J., Recoco, G. A., Pandi, A. W., Padrones, J. M., & Ignacio, J. J. (2022). Evaluating workplace safety in the oil and gas industry during the COVID-19 pandemic using occupational health and safety vulnerability measure and partial least square structural equation modelling. Cleaner Engineering and Technology, 6, 100378. https://doi.org/10.1016/j.clet.2021.100378
Koh, D., & Tan, A. (2024). Applications and impact of industry 4.0 - Technological innovations in occupational safety and health. Safety and Health at Work, xxxx, 9–11. https://doi.org/10.1016/j.shaw.2024.09.001
Oliveira Neto, G. C. de, Tucci, H. N. P., Godinho Filho, M., Lucato, W. C., & Correia, J. M. F. (2021). Performance evaluation of occupational health and safety in relation to the COVID-19 fighting practices established by WHO: Survey in multinational industries. Safety Science, 141(May), 105331. https://doi.org/10.1016/j.ssci.2021.105331
Park, D. U., Zoh, K. E., Jeong, E. K., Koh, D. H., Lee, K. H., Lee, N., & Ha, K. (2024). Assessment of occupational health risks for maintenance work in fabrication facilities: Brief review and recommendations. Safety and Health at Work, 15(1), 87–95. https://doi.org/10.1016/j.shaw.2023.11.010
Pribadi, A. P., Rahman, Y. M. R., & Silalahi, C. D. A. B. (2024). Analysis of the effectiveness and user experience of employing virtual reality to enhance the efficacy of occupational safety and health learning for electrical workers and graduate students. Heliyon, 10(15), e34918. https://doi.org/10.1016/j.heliyon.2024.e34918
Ramkalawon Veerapen Chetty, D., Boojhawon, R., Bhagwant, S., & Levy, L. (2024). Factors affecting the occupational safety and health of small and medium enterprises in the construction sector of Mauritius. Social Sciences and Humanities Open, 10(May), 100964. https://doi.org/10.1016/j.ssaho.2024.100964
Soykan, O. (2023). Occupational health and safety in the Turkish fisheries and aquaculture; a statistical evaluation on a neglected industry. Safety and Health at Work, 14(3), 295–302. https://doi.org/10.1016/j.shaw.2023.07.004
Wilhelm, V. (2018). Occupational health and safety. In Solid Waste Landfilling: Concepts, Processes, Technologies. Elsevier Inc. https://doi.org/10.1016/B978-0-12-407721-8.00041-3
Wood, A., Breffa, C., Chaine, C., Cubberley, R., Dent, M., Eichhorn, J., Fayyaz, S., Grimm, F. A., Houghton, J., Kiwamoto, R., Kukic, P., Lee, M. S., Malcomber, S., Martin, S., Nicol, B., Reynolds, J., Riley, G., Scott, S., Smith, C., … Gutsell, S. (2024). Next generation risk assessment for occupational chemical safety – A real world example with sodium-2-hydroxyethane sulfonate. Toxicology, 506(March), 153835. https://doi.org/10.1016/j.tox.2024.153835
Yoon, S. J., Lin, H. K., Chen, G., Yi, S., Choi, J., & Rui, Z. (2013). Effect of occupational health and safety management system on work-related accident rate and differences of occupational health and safety management system awareness between managers in South Korea’s construction industry. Safety and Health at Work, 4(4), 201–209. https://doi.org/10.1016/j.shaw.2013.10.002
