PENINGKATAN NILAI TAMBAH BAMBU MELALUI PENERAPAN TEKNOLOGI PENGOLAHAN BAMBU DI DESA LEGOK KECAMATAN BANTARKAWUNG KABUPATEN BREBES
DOI:
https://doi.org/10.29303/abdiinsani.v11i4.2032Keywords:
Bamboo Products, Legok Village, Quality Products, Effective, EfficientAbstract
The problem faced in Legok Village in general is the large number of Poor Family Heads. Village monograph data in 2023 shows that out of 824 families, 54.85% of them (452 families) are poor families. This village has very large bamboo plant potential, but it has not been managed properly. In this village there is a Bamboo Farmer group "Tunas Karya Lestari" and a Bamboo Craftsman group "Berkah Bambu Lestari" but they have not been empowered optimally. This poverty problem can be overcome by increasing community income through efforts to make Legok Village a bamboo-based business center from upstream to downstream in accordance with the potential of this village. The purpose of this activity is to develop bamboo products in Legok Village by overcoming the problems in it. The method of activity is to conduct bamboo cultivation development training and training in making unique bamboo products that are suitable for marketing. The results of the activity are bamboo material preservation training, bamboo pest control training, financial management training, administrative management, product manufacturing capabilities that increase selling prices and markets. The result of the training is the readiness and creation of bamboo product producers who are able to produce quality products, effectively and efficiently, and are able to increase sales of bamboo products.
Keywords: Bamboo Products, Legok Village, Quality Products, Effective, Efficient
Downloads
References
Abdillah, M. B., Hakim, R. M. A., Damiri, D. M., & Zahra, F. (2018). Analisis strategi bisnis pada UMKM kerajinan bambu di Kota Bandung. AdBispreneur, 2(3), 227–242.
Fajar, A. F. (2019). Analisis faktor-faktor yang memengaruhi tingkat pendapatan pengrajin anyaman bambu di Kenagarian Koto Baru Simalangang Kecamatan Payakumbuh (Doctoral dissertation, Universitas Andalas). Shinta.
Haryanto, H., Wariyatno, N. G., Sudibyo, G. H., & Purnomo, S. N. (2014b). Kapasitas beban balok beton bertulang dengan perkuatan metode near surface mounted menggunakan bambu petung. Seminar Nasional Percepatan Desa Berdikari Melalui Pemberdayaan Masyarakat dan Inovasi Teknologi, Purwokerto.
Haryanto, Y., Wariyatno, N. G., & Sudibyo, G. H. (2013). Perilaku lentur balok beton dengan perkuatan bambu petung dan perekat berbahan dasar semen. Konferensi Nasional Teknik Sipil 7 (KoNTekS 7), Surakarta.
Haryanto, Y., Wariyatno, N. G., & Sudibyo, G. H. (2014a). Kekuatan dan kekakuan balok beton dengan perkuatan geser bambu petung dan perekat berbahan dasar semen. Seminar Nasional Teknik Sipil IV, Solo.
Haryanto, Y., Wariyatno, N. G., & Sudibyo, G. H. (2019). Precast segmental bamboo reinforced concrete beams with bolted connections subjected to flexural loads: An experimental investigation. IOP Conference Series: Materials Science and Engineering, 615, 7th International Conference on Euro Asia Civil Engineering Forum, Germany.
Hermanto, N. I. S., Sudibyo, G. H., & Sobari. (2012). Perilaku mekanik sambungan claw nail plates pada batang laminasi bambu-glugu. Simposium Nasional Rekayasa dan Budidaya Bambu I, Yogyakarta.
Lesmana, I. P. D., Widiawan, B., & Hartadi, D. R. (2019). Pengembangan pemasaran online kerajinan anyaman bambu Antirogo Jember melalui media internet. Jurnal Bakti Masyarakat Indonesia, 1(1).
Nurhidayah, I., Pujiati, U., & Watemin. (2015). Kontribusi kerajinan anyaman bambu terhadap pendapatan keluarga petani di Kecamatan Petanahan Kabupaten Kebumen. Agritech, 17(2), 113–121.
Rahman, K. (2015). Pengembangan desain kerajinan anyam bambu Desa Kalinganyar Pulau Kangean. Jurnal Seni Rupa, 3(03).
Sudibyo, G. H., Hermanto, N. I. S., Hu, H. T., Haryanto, Y., Nugroho, L., & Mulyono, B. (2021). Flexural load and deflection behavior of structural bamboo filled with cement mortar. Jurnal Teknologi.
Sudibyo, G. H., Hermanto, N. I. S., & Kusnaman, D. (2017). Peningkatan kapasitas produksi pengolahan kayu lokal menjadi bahan bangunan berbasis laminasi di Kabupaten Purbalingga. Prosiding Seminar Nasional LPPM Unsoed, Purwokerto.
Sunarsih, L., & Umar, H. M. S. (2016). Strategi pemasaran home industry pengrajin anyaman bambu di Desa Gintangan Kecamatan Rogojampi Kabupaten Banyuwangi. Jurnal Pendidikan Ekonomi: Jurnal Ilmiah Ilmu Pendidikan, Ilmu Ekonomi dan Ilmu Sosial, 9(1).
Wariyatno, N. G., Haryanto, Y., Sudibyo, G. H., & Sumiyanto. (2015b). Dinding partisi beton tulangan bambu dengan variasi jarak antar tulangan. Konferensi Nasional Teknik Sipil 9, Makassar.
Wariyatno, N. G., Haryanto, Y., Sudibyo, G. H. (2015a). Pengaruh panjang penyaluran sambungan terhadap kekuatan balok beton pracetak tulangan bambu. Jurnal Ilmiah Dinamika Rekayasa, 11(1).
Widyaningrum, A., Sudibyo, G. H., Pamudji, G., & Hermanto. (2017). Pengawetan bambu dengan metode vertical soak diffusion (VSD) di Desa Bokol Kecamatan Kemangkon Kabupaten Purbalingga. Prosiding Seminar Nasional dan Call for Papers "Pengembangan Sumber Daya Perdesaan dan Kearifan Lokal Berkelanjutan VII", 17–18 November.
Wijaya, I. B., & Utama, M. S. (2016). Analisis faktor-faktor yang mempengaruhi pendapatan industri kerajinan bambu di Kabupaten Bangli. E-Jurnal Ekonomi Pembangunan Universitas Udayana, 5(4), 385–429.
Wilanda, T. P. (2019). Analisis efisiensi dan skala ekonomis pada industri kerajinan anyaman bambu Kecamatan Susut Kabupaten Bangli. The Journal of Economics Development, 8(1), 1–24.
Zulfikar, A., Sidabutar, H., Susilo, C., & Justisia, A. (2014). Studi permintaan pasar untuk produk-produk bambu dan penilaian tentang teknologi-teknologi memproses bambu. https://www.itto.int/files/itto_project_db_input/2981/Technical/PD-600-11-R1-I-Technical%20Report-Act-1.2.pdf
